◆DO NOT put the package plastic bags in reach of children or babies.
*It might cause asphyxia if children or babies putting the bags into their mouths.
◆DO NOT plug the AC adapter into the outlet in improper situation.
*Plucking or plugging AC adapter by wet hand might cause electric shock.
Plugging AC adapter unsteadily might cause fire or electric shock.
◆DO NOT cover the AC adapter when it is  connected to power socket, place the adapter near heaters,  and put it on the floor which is equipped with a heater.
*The above-mentioned operation might cause fire or incidents.
◆DO NOT use it aboard, please abide by the airway's provision.
*It might influence the communication aboard and the flying apparatus if departing from the airway's regulation. This will result in accident, possible death and severe physical hurt.
◆DO NOT put the camera in the wet place where water might splash or where rainwater and mist might erode(Except weather-proof series).
*This place might cause fire, shock, short circuit, etc.
◆DO NOT disassemble or repair the camera, the receiver and other relevant peripheral equipments.
*Improper disassembly might cause damages to the product or the peripheral equipment.
◆DO NOT put the camera in the quaky places.
*The camera may be unstable or out of operation if installed improperly. Such installation may also cause breakdown.
◆DO NOT use the receiver on the surface of thermolabile material.
*Please embed thermal insulating material when using on the surface of the thermolabile material.
◆DO NOT place or use the AC adapter on temperature sensitive materials.
*The above practice might cause the plastic distortion, fading or sticking on the surface.
◆DO NOT touch, shake or hold the aerial.
*Touching, shaking or holding the aerial might influence the receiving of electromagnetic wave, And thereby influence the receiving effect.
◆DO NOT use several cameras with neighboring frequency working too close at the same time.
*The electromagnetic wave signal of the neighboring frequency might cause slight interferences and so influence the receiving effect.
◆DO NOT let several cameras with same frequency work at the same time.
*The overlap of the electromagnetic wave signal of the same frequency might cause severe interferences and so result in unable to receive signals.
◆Please readjust the button of brightness on TV or on monitor till getting the optimum efficiency.
*There are slight differences of brightness among cameras you can adjust it by the brightness button.
◆DO NOT use the camera in complex environment. The obstruction of stumbling block will affect the electromagnetic wave and influence the receiving range.
*Wall, tree and other stumbling block might absorb, reflect the electromagnetic wave, and influence the receiving range.
◆DO NOT use the camera in the places which are covered by metal.
*The around metal such as elevator, cabin, might shield the electromagnetic wave, and result in unable to receive signals.